vs-1kab-e series www.vishay.com vishay semiconductors revision: 04-apr-14 1 document number: 93559 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 single phase rectifier bridge, 1.2 a features ? ease of assembly, in stallation, inventory ? high surge rating ?compact ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 description a 1.2 a diode bridge rectifie r assembly designed for new circuits and for replacement service. for printed circuit board applications. ? ? ? ? ? electrical specifications product summary i o 1.2 a v rrm 100 v to 1000 v package d-38 circuit single phase bridge d-38 major ratings and characteristics symbol characteristics values units i o 1.2 a i fsm 50 hz 50 a 60 hz 52 i 2 t 50 hz 17.7 a 2 s 60 hz 16.1 v rrm 100 to 1000 v t j -55 to 150 c voltage ratings cross reference v rrm , v rsm (v) v rms (recommended) (v) maximum (1) load capacitance (f) minimum source resistance (see figure 3) ( ? ) part number din code VS-1KAB10E b40c1000 100 40 5000 0.5 vs-1kab20e b80c1000 200 80 3300 0.8 vs-1kab40e b125c1000 400 125 1600 1.5 vs-1kab60e b250c1000 600 250 1200 2.6 vs-1kab80e b380c1000 800 380 800 3.0 vs-1kab100e b500c1000 1000 500 600 5.0
vs-1kab-e series www.vishay.com vishay semiconductors revision: 04-apr-14 2 document number: 93559 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) i 2 t for time t x = i 2 ? t x ? t x fig. 1 - average (dc) output current vs. maximum allowable am bient temperature fig. 2 - maximum non-repe titive surge current vs. pulse train durati on (f = 50 hz) forward conduction parameter symbol test conditions values units maximum dc output current i o t a = 45 c, resistive or inductive load 1.2 a t a = 45 c, capacitive load 1.0 maximum peak one cycle, ? non-repetitive surge current i fsm 50 hz half cycle sine wave ? or 6 ms rectangular pulse following any rated load condition, and with rated v rrm applied following surge 50 a 60 hz half cycle sine wave ? or 5 ms rectangular pulse 52 maximum i 2 t capability for fusing i 2 t t = 10 ms rated v rrm applied following surge, initial ? t j = 150 c 12.5 a 2 s t = 8.3 ms 11.3 t = 10 ms v rrm = 0 following surge, initial t j = 150 c 17.7 t = 8.3 ms 16.1 maximum i 2 ? t capability for fusing i 2 ? t (1) t = 0.1 to 10 ms, v rrm following surge = 0 177 a 2 ? s maximum peak forward voltage per leg v fm i o = 1.2 a (1.88 a pk )1.1v typical peak reverse current per leg i rm t j = 25 c, at rated v rrm 10 a t j = 150 c, at rated v rrm 500 operating frequency range f 40 to 2000 hz thermal and mechanical specifications parameter symbol values units operating junction and storage temperature range t j , t stg -40 to 150 c approximate weight 3g 0.1 oz. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 0 20 40 60 80 100 120 140 160 average output current (a) maximum allowable ambient temperature (c) capacitive load resistive, inductive load maximum peak output current (a) equal amplitude pulse train duration (s) 50 40 30 20 10 0 10 -2 10 -1 110 60 following any rated load condition and with rated v rrm applied following surge
vs-1kab-e series www.vishay.com vishay semiconductors revision: 04-apr-14 3 document number: 93559 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - minimum requir ed source resistance vs. rms supply voltage and load capacitance fig. 4 - maximum switch-on surge current vs. surge duration circuit configuration rms supply voltage (v) minimum required value of source resistance ( ) 500 400 300 200 100 0 0123456 600 c l = 400 f c l = 600 f c l = 800 f c l = 1200 f c l = 1600 f c l = 3300 f c l = 5000 f c l = 7000 f c l = 200 f 0.5 1 2 5 10 10 -1 10 10 2 10 3 1 average output current (a) switch-on surge duration (s) resistive, inductive load capacitive load initial t j = 45 c links to related documents dimensions www.vishay.com/doc?95327 (+) ac ac (-)
document number: 95327 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 04-jul-08 1 d-38 outline dimensions vishay semiconductors dimensions in millimeters (inches) 5.1 (0.2) 5.1 (0.2) 5.1 (0.2) ? 0.8 (0.031) ~ ~ + - 9.5 (0.37) 9.5 (0.37) 10 (0.39) 25.4 (1.0)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: vishay: ? 1kab05e? 1kab100e? VS-1KAB10E? 1kab20e? 1kab40e? 1kab60e? 1kab80e? vs-1kab60e? vs-1kab20e? vs- 1kab40e? vs-1kab100e
|
